1 5

Fujitsu

Fujitsu D3307 / OEM 9300-8i SATA / SAS HBA Controller IT-Mode 12Gb PCIe 3.0 x8

Fujitsu D3307 / OEM 9300-8i SATA / SAS HBA Controller IT-Mode 12Gb PCIe 3.0 x8

$79.90 USD
$79.90 USD
Sale Sold out
Shipping calculated at checkout.
Condition

The Fujitsu D3307 is a professional 12 Gb dual port host bus adapter for servers and workstations that allows you to increase the number of connected hard drives. Manufacturer of the component is Avago. The chipset is LSI SAS3008, the same as for the Broadcom version 9300-8i. The host bus adapter offers a PCIe x8 3.0 Port. Via two internal miniSAS SFF-8643 ports, you can connect up to 8 drives. The adapter is universally compatible with all known brands. It's flashed with the latest IT mode firmware. The HBA can be used for Unraid, FreeNAS, TrueNAS, Windows 10 and other operating systems. Full and low profile brackets are included. They are all functionally identical.

  • The host bus adapter serves as an interface for storage devices.
  • Ports: PCIe x8 3.0, 2x miniSAS SFF-8643 for up to 8 SATA / SAS drives
  • The maximum data transfer rate is 12Gbps.
  • Full and low profile brackets for installation are included.
  • The latest IT mode firmware is installed on the adapter.
  • Alternatively labeled as: D3307, D3307-A12, CP400i, 9300-8i, 9311-8i, HBA330, HBA330+, J7TNV, 0J7TNV

Specifications

MPN: CP400i
Bus type: PCIe x8 3.0
Interface: SFF-8643 and SAS / SATA
Number of ports: 8
Max. data transfer rate: 12 Gbps
RAID levels: IT mode
Bracket height: Full + Low Profile
View full details

Safety Precautions

ATTENTION:

Before changing your system configuration, always back up your data to prevent data loss.

Hardware should only be handled by qualified technicians in an ESD safe environment with ESD safe tools.

Before installing components, always consult the manufacturer’s manual.

CAUTION:

Always turn off the power to your system and remove the AC power cord before installing or removing hardware to avoid experiencing electrical shock or damaging the system.

During operation, heat sinks can heat up significantly. Do not touch them immediately after turning off the power. Leave sufficient time for cooling off before touching them to avoid burns.

Server systems require sufficient ventilation, as provided by a rack case. Insufficient ventilation can cause overheating of components and potentially damage them.

Any questions about this product? We're here to help!